Aluminium Angle 20 × 12 × 1.5 mm — Die 1097 Mill run:407 m ($3.69 per l/m) anodised ends — no raw

anodised ends — no raw aluminium cut ends

down to around 20 kg

Cut to your length

designed and extruded by us here in New Zealand

Use a sharp

Aluminium Angle 20 × 12 × 1.5 mm — Die 1097 Mill run:407 m ($3.69 per l/m) anodised ends — no rawRun to order aluminium extrusion profile (die 1097). Category: Angle Weight: 0. 123 kg m Perimeter: 64 mm Equivalent to: UA1731 Available as a mill run: 50 kg run approx 407 m (indicative $3. 69 m) 250 kg run approx 2033 m (indicative $1. 60 m) Mill Run Profiles Produced to order at our Wellington plant. We do not hold these profiles in stock, so a minimum mill run quantity applies to make production economic. Typical production runs are 150 to 500